Courses

This five-day course is designed for 2^nd and 3^rd year apprentices, as well as journeyperson crane operators who would like to gain familiarity with All Terrain cranes. The course includes pre-start checks, LICCON2 configuration, Bluetooth Terminal (BTT) operations, remote operations, jib installation, crane setup and operation, and load chart calculations. The final day will be for evaluation. Please note that members are required to successfully complete a pre-course assignment prior to attending. 

The on-line portion can be completed on a personal computer with Internet access or at the OE Local 955 Training Edmonton Hall.

The Komatsu HM-300 Articulated Haul Truck provides our members with the opportunity to gain experience in operations such as loader and excavator truck loading, as well as navigating a driving confidence course. These theoretical and practical skills are aimed at helping students become more confident and skilled Articulated Haul Truck operators.

.

This blended learning course offers a combination of online theory and two days of instructor-led theory and practical applications. The online theory lessons (approximately 3 to 5 hours) must be completed on your own time 5 days prior to the course start date.

Created by the Crosby Group, this course covers the rigger’s responsibilities, Alberta OH&S regulations, sling types, hardware descriptions and working load limits (WLL). Students will practice rigging calculations, identify and utilize various rigging hardware, and learn about inspection standards and maintenance procedures.

The practical portion of the course includes basic load rigging using hooks, shackles, chains, wire ropes, and synthetic slings. Students will also learn and practice standardized crane signals and basic knot tying techniques. Successful students will be awarded a Certificate of Completion.

The in-class and practical training will take place at the Budd Coutts Apprenticeship and Education Centre.

This course is designed to provide participants with the knowledge and skills required to recognize and manage fall hazards in the workplace. Participants will learn about fall protection systems, including fall arrest system components, how to properly inspect fall protection equipment, and strategies to eliminate or control fall hazards through effective safety measures. Successful participants will receive a Certificate of Completion, valid for three years.

Please note that during the practical exercise you will be suspended in a harness for a short period of time.

Class 5 Forklift - Blended Learning

This blended learning course offers a combination of online theory and a full day of instructor-led practical training. The 1-hour online theory lessons must be completed on your own time prior to the course start date. During your practical training, you will learn the essential skills for operating a counterbalanced, vertical mast forklift as outlined in CSA B335-04. You will also locate and interpret information and machine capacities directly from the owner’s manual. Practical exercises and a theory exam will be used in the evaluation process. Successful students will be awarded a Class 5 Forklift Certification, valid for three years.

This comprehensive safety training course, developed by Energy Safety Canada, is designed for workers who may encounter hydrogen sulfide (H₂S) gas (sour gas) in their workplace. It covers the properties and health risks of H₂S, including its toxic nature and symptoms of exposure. Participants will learn how to detect H₂S gas, use the appropriate personal protective equipment (PPE), and implement emergency response procedures, including rescue techniques and first aid. Successful students will be awarded an ESC Certificate, valid for three years.

This 3-week course includes both theory and practical components. The theory module covers machine systems, operator maintenance requirements, and OH&S regulations while the practical portion demonstrate the fundamentals of earthwork. Practical exercises and a theory exam will be used in the evaluation process. Please note that members are required to successfully complete a pre-study assignment prior to attending. Successful students will be awarded a Certificate of Completion.

• Pre-study assignment required
• Registration by application only – phone for details

This 3-week course includes both theory and practical components. The theory module covers machine systems, operator maintenance requirements, and OH&S regulations while the practical portion demonstrate the fundamentals of earthwork. Practical exercises and a theory exam will be used in the evaluation process. Please note that members are required to successfully complete a pre-study assignment prior to attending. Successful students will be awarded a Certificate of Completion.

• Pre-study assignment required
• Registration by application only – phone for details

This course teaches participants to interpret manufacturers’ load charts. Students will learn how to calculate gross loads, determine maximum radius, analyze gross capacity percentages, and utilize range diagrams. In addition, it also focuses on understanding manufacturers’ notes and safety warnings within the Load Chart Manuals. Participants will gain hands-on experience with load chart calculations involving various capacity restrictions to ensure safe and efficient crane operations. The training will cover a variety of cranes and boom trucks including crawler cranes, all-terrain cranes, and rough-terrain cranes.

Mobile Crane 1st Period Apprenticeship Technical Training

This 6-week course follows the Alberta Apprenticeship and Industry Training (A.I.T.) Mobile Crane Outline. The course offers a combination of theory and instructor-led practical training. The course covers federal and provincial regulations, crane components and systems, mathematics, load chart interpretation, and basic operating procedures. Practical training includes crane inspections, set-up, configuration, and operation. Students will complete field exercises using a Liebherr LTM 1070-4.2 all-terrain crane, a Tadano GR-350XL-2 rough-terrain crane, and a HIAB articulating (knuckle or folding) boom on a Peterbilt 548 chassis. At the end of the course, students will write the provincial first period mobile crane examination with A.I.T. First Period Mobile Crane accreditation will be awarded to successful students.

• Prerequisite: registered 1st year Alberta mobile crane apprentices
• Registration by application only – phone for details

Mobile Crane 3rd Period Apprenticeship Technical Training

This 6-week course follows the Alberta Apprenticeship and Industry Training (A.I.T.) Crane and Hoisting Equipment Operator Outline. The course offers a combination of theory and instructor-led practical training. The course covers federal and provincial regulations, crane components and systems, mathematics, load chart interpretation, and operating procedures. Practical training includes crane inspections, set-up, configuration, and operation. Students will complete field exercises using a Liebherr LTM 1070-4.2 all-terrain crane, a Tadano GR-350XL-2 rough-terrain crane, and a Kobelco CK850G-2 crawler crane. At the end of the course, students will write the provincial third period mobile crane examination and the Red Seal exam with A.I.T. Third Period Mobile Crane accreditation will be awarded to successful students.

• Prerequisite: registered 2nd or 3rd year Alberta mobile crane apprentice
• Registration by application only – phone for details

This two-day class includes learning machine systems, OH&S regulations and operating a Skid Steer. Students will be introduced to basic earthwork concepts and terms, and will also find information in the owner’s manual to follow the manufacturer’s operating recommendations. Practical exercises and a theory exam will be used in the evaluation process. Successful students will be awarded with a Certificate of Qualification, valid for three years.

This course, intended for experienced operators with previous certification and/or prior experience, covers the fundamentals of operating a Skid Steer or CTL as well as how to find information directly from the owner’s manual. Theory and practical testing will be the sole focus in the evaluation process. Successful students will be awarded with a Certificate of Completion, valid for three years.

This two-day St. John Ambulance Standard First Aid course covers all aspects of Emergency First Aid, including Level C CPR and AED training. Participants will learn to manage a wide range of injuries and illnesses, including head and spinal injuries, fractures in the upper and lower limbs, and other medical emergencies. Successful students will be awarded a Standard Level C CPR & AED First Aid Certificate from St. John Ambulance, valid for three years.

This two-day introductory course covers learning machine systems, OH&S regulations, and the operation of a Class 7 Rough Terrain Telehandler. Students will learn the basics of forklift operations, how to determine lifting capacities by interpreting the manufacturer’s load charts, and how to find information in the owner’s manual to follow the manufacturer’s operating recommendations. Practical exercises and a theory exam will be used in the evaluation process. Successful students will be awarded a Class 7 Rough Terrain Telehandler certificate, valid for three years.

This course, intended for experienced operators with previous certification and/or prior experience, covers the fundamentals of operating a Class 7 Rough Terrain Telehandler as well as how to find information directly from the owner’s manual. Theory and practical testing will be the sole focus in the evaluation process. Successful students will be awarded with a Certificate of Completion, valid for three years.

Our Tower crane orientation course is conducted using a Potain MDT 219-J8. The course is designed for 2nd year tower crane apprentices and Alberta mobile crane journey persons that were issued their license prior to September 1st 2018.  The course includes pre-start checks, test lift procedures, load moment Indicator programming, load chart calculations, and hoisting operations. The final day will be for evaluation. Successful students will be awarded a Certificate of Completion.

• Prerequisites:
  • Alberta 2^nd year tower crane apprentice or journey person, OR 
  • Alberta mobile crane journey persons with a license issued prior to September 1st 2018, 
  • CSTS, and 
  • ESC Fall Protection
• Registration by application only – phone for details

This two-day class includes learning OH&S regulations, machine systems, components and maintenance, and operating a Wheel Loader. Students will be introduced to basic earthwork concepts and terms and will also find information in the owner’s manual to follow the manufacturer’s operating recommendations. Practical exercises and a theory exam will be used in the evaluation process. Successful students will be awarded a Wheel Loader Certification, valid for three years.